Regulators & Accessories

If you have a draft beer system, the two most important components for dispensing your beer are the gas tank and the regulator. The gas tanks are filled with either CO 2 or Nitrogen (you can also use other gases), and the regulator controls the flow of the beer from the keg. The regulator controls the pressure of the gas released from the tank. Without it, it will be too difficult to dispense the beer as the pressure would be too intense. What will happen is that the flow would as a strong jet of water.

Regulators often come with gauges that measure the dispensing pressure to control the liquid and the pressure flow. The regulator can have one or more gauges, and they may have different functions. For Carbon dioxide air tanks, the pressure should be between 10 to 15 PSI, while Nitrogen tanks should be higher at 30 to 40 PSI.

Here at Ontario Beer Kegs, we have a wide variety of draft equipment regulators. Our selection includes Primary and Secondary CO2 and Nitrogen regulators from Taprite, plus we also carry Micro Matic Nitrogen regulators and their high-quality Primary and Secondary CO2 regulators. From dual gauge to five-gauge regulators, we make sure that we provide the needs of homebrewers. All of our regulators are approved for use by all major breweries and are manufactured with a solid brass body with a shutdown safety system to prevent accidents. We make sure that we have everything that you need for your draft beer system.